A collection of 12 posts
Introduction to hardware watchdogs Function of hardware watchdog is to monitor if system is working correctly and if it goes into an unknown state (ie. freezes or stops working as expected) to return
Some time ago I wrote how to add Real Time Clock (RTC) support to OpenWrt. Currently support for RTC chip DS1370 is still not 100% there in OpenWrt because there is a bug
Why is Huawei E3372h awesome? * Supports 4G/LTE * Superior signal quality * Very reasonably priced (on EU eBay [http://www.ebay.co.uk/sch/i.html?_from=R40&_sacat=0&_sop=15&
Pokrećem seriju članaka o osnovama OpenWrt sustava, u ovoj seriji članaka pisati ću o tome što je OpenWrt, za koga je napravljen, koje su mu mogućnosti i kako s njim napraviti neke zanimljive
In this article I'll do a bit of digging under the skin and do some reverse engineering of SoundMate M1 audio streaming device. OpenWrt is a not your average embedded OS,
Carambola 2 [http://www.8devices.com/carambola-2] is nice embedded development board running Linux, to be exact it is running OpenWrt [https://openwrt.org/]. Carambola 2 is based on AR9331 [https://wikidevi.com/
We take real time clock (RTC) for granted, as all of our gadgets keep correct time even when we turn them off. Now imagine that you have to set correct time each time
Bonbon [http://www.bonbon.hr] omogućava vrlo pristupačan pristup Internetu. No ukoliko želite vezu podijeliti s više ljudi onda je vam treba i prijenosni wifi access point, naravno pogonjen OpenWrt-om. U par koraka
You can easily get temperature readings from external Dallas DS18S20 sensors (1-wire protocol) on your TP-Link WR703N. First things first, grab your credit card and order few Dallas DS18S20 sensors [http://pinterest.com/
This post is just to remind me later of few misc openwrt wireless commands. First there is no iwconfig you need to install it: opkg update opkg install wireless-tools iwconfig command shows current
Hi, we have been testing what is the absolute maximum speed over wifi when using openwrt, for out test we used this hardware: * 2 x Ubiquity Router station * 2 x Wistron CM9 802.
I have an older Linksys WRT54GL v1.1 with Tomato firmware [http://www.polarcloud.com/tomato]. Although I'm a hardcore Linux geek I never used OpenWRT [https://openwrt.org/], yeah, I